One disadvantage of the original oscillator circuit was the lack of available frequency shift.
The circuit below addresses that problem for the versions that run between 5 and 7 MHz.
Depending on crystal used you may find a tunable range of 7 KHz.
Just replace the first 2 stages from the normal circuit with those below.
To use on other bands the windings on L1/L2 would need changing.
The circuit below addresses that problem for the versions that run between 5 and 7 MHz.
Depending on crystal used you may find a tunable range of 7 KHz.
Just replace the first 2 stages from the normal circuit with those below.
To use on other bands the windings on L1/L2 would need changing.
1 comment:
Please, can you tell me the value of the 4T-FB inductance L3, thank you very much.
Post a Comment